Our Structural Health Sensor is truly a peace of marvelous engineering. Just read it's specs and you will discover its wide range of applications.
Its processing power in combination with its top of the range onboard sensor array and corrosion free casing makes it a truly high-end sensing device you can build upon.
Specifications
Utilization:
- Aluminium/Stainless Steel IP68+ housing
- ATEX-0 ready
- Weigth: 1060 [grams]
- Dimensions (LxWxH): 140 x 75 x 90 [mm]
- Power supply: 12 → 75 Vdc
- PoE IEEE802.3af & –at mode A DataWires
- Bus system: StabiBus®
- Operating temperature: -200C to 600 [C]
- 100 Tx base Ethernet
- Wifi IEEE802.11b/g/n
- Activation over Reed
- Indication RGB LED
- Android StabiApp®
- Auto Event Sensing & Triggering
- Autonomous Sensitivity Adaption
- HF datablock up to 5min.@400Hz
- Data Storage up to 32GB
- URL Alert
Inclination(micro):
- Bi-directional inclination detection
- Resolution between: 0.000046 - 0.000039 [g]
- Accuracy: ± 0.0003%
- Range: ≤ 1° around zero-point
- Sample rate: 100Hz
- Reaction delay: 0.01s
- Extreme load response time: < 3s
Inclination(macro):
- Resolution: 0.024 [g]
- Accuracy: ± 0.01%
- Range: 360° x 360° (> 1°)
- Sample rate: 400Hz
Acceleration:
- Tri-axis accelerometor array
- Ranges: ± 2G (default) ↔ ± 16G
- Sample rate: 400Hz
- Sensitivity: 0.15μm/s@1Hz ↔ 60μm/s@400Hz
- Resolution: 61μG/Bit
- Temperature Drift: 0.01% Resolution/degree
- Noiselevel: 3mG